[ product focus ]
Argo span-wire LED
design iGuzzini
• Wiring suspended luminaire with direct emission for LEDs with street optic.• Suspended installation.
• Made up of optical assembly and fixing system.
• Optical assembly and inspection lid made of die-cast aluminium, with hemispherical shape, subjected to chromatization, double primer, passivation at 120° C , liquid (texturized black) paint, baking at 150°C; opening with clips without tools, lid fixed with hinge. Diffuser sealed with silicone to PMMA body with 3mm thickness; 50 Shore black silicone seal.
• Optical assembly complete with decompression valve.
• +15°/-15% orientation with respect to horizontal axis; 360° orientation with respect to vertical axis.
• Monochromatic LED version with 48-power LED circuit, in Cool White (6000K) and Neutral White (4000K) colour temperature, optics with plastic lens.
• LED average life at 25°C RT: L70>90000 h.
• Electronics average life at 25°C RT =100000 h.
• Pull-out control gear and optical assembly connected with fastcoupling connectors for quick independent operation.
• 220-240Vac 50/60 Hz built-in selv electronic ballast.
• Driver with internal temperature automatic control system.
• Product operation at 100% for Room Temperature from -20 °C to + 40°C, at higher RT values the system reduces the intensity of power supply current of the LEDs to allow for correct operation.
• Version for -40°C RT on demand.
• Driver with 4 predefined operation profiles selected with dip switches, possibility of personalised operation cycles with dedicated software via USB flash drive.
• Protection system against mains spike up to 4Kv.
• Terminal block with 4 AT fuse.
• Stainless-steel external screws.
• Die-cast aluminium fixing system with anchoring system to AISI 304 stainless steel wire.
• Attached on cables/wires with diam. from 6 to 12mm.
• Stainless steel anti-fall safety system.
• No light flow emission in upper hemisphere in horizontal position (in compliance with the strictest regulations against light pollution).
• The technical characteristics of the fitting comply with EN60598-1 standard.
• IP66
• ENEC approval
• F seal
• Class of Insulation II
