[ new products ]

New Archilede/Lavinia poles

• Available in buried versions (except for curved conical poles) and with plate.

• Poles made of EN10025-S235JR steel, hot galvanized with 70 micron thickness in compliance with UNI EN ISO 1461 (EN40-5).

• Powder paint surface treatment.

• Curved conical shape with 70 mm final diameter ; cylindrical shape with 160 mm diameter.

• 4 mm thickness for codes 1515/1570/1588/1910,3 mm thickness for codes 1511/1566/1585/1909/, 3 mm thickness for curved conical poles.

• 150x50 mm slot for cable access.

• 400x400m anchoring plate (280x280 for poles with code 1511/1566/1585/1909)made of hot galvanized steel with 70 micron thickness, with 4 slots.

• Anchoring plate and bolts (to be ordered separately).

• Flush inspection lid IP44 310x95 mm made of cast aluminium with seal gasket, flush IP30 400x90mm (for curved conical poles) made of steel.

• Terminal block with single or double fuse-holder, 4 poles and 3 ways per pole; incoming cables with 16 mm2 section and outgoing cables with 2.5 mm2 section.

• Suitable for Italian, French, Spanish, German, Swiss and British terminal blocks (with DIN bar and wooden adapter to be ordered separately).

• Internal earthing system with stainless steel grounding lug and screw.

• Versions complete with single or double arm, available with L=1400mm and L=2800mm, respectively. S235JR steel arm with 76mm diam. and 4 mm thickness.
Subjected to powder paint treatment.

• Arms fixed to pole with 4 M10 screws.

• Terminal block: terminal block IP44 IK08 (1863).